Home/Resources/Environmental Compliance Checklist for Metal Manufacturers
✅ Environmental Compliance · 50 Points · Metal Manufacturers
Environmental Compliance Checklist for Metal Manufacturers
A 50-point environmental compliance checklist for Indian metal manufacturers — Consent to Operate, water discharge, air emissions, hazardous waste, and EPR.
Pollution Control Board Compliance
Valid CTE (Consent to Establish) and CTO (Consent to Operate) from State PCB — check expiry
CTO must be renewed annually — set reminder 90 days before expiry
Environment Statement (Form V) filed annually by September 30
Air emission monitoring records maintained for furnaces, generators
Stack emission test reports (quarterly) within permissible limits
Water Management
ETP (Effluent Treatment Plant) operational and producing treated effluent within limits
Daily ETP parameters recorded: pH, TSS, BOD, COD
Treated effluent recycled or discharged to approved drain — not open ground
Zero Liquid Discharge compliance if mandated for your district
Rainwater harvesting structure in place if required under state rules
Hazardous Waste Management
Authorization from PCB for generation, storage, disposal of hazardous waste
Hazardous waste (used oil, metal sludge, spent electrolytes) in labelled containers
Waste manifests maintained for every hazardous waste dispatch
Disposal only through PCB-authorized recyclers/processors
Annual return to PCB on quantity generated and disposed
Labour & Worker Health
PPE provided and enforced: helmets, gloves, safety shoes, goggles
Factory Acts compliance: working hours, overtime, leave records
Periodic medical examination for workers handling hazardous processes
First aid trained personnel and first aid box always available
Fire NOC from local fire department — valid and displayed